|
Click on any job listing to view. Click again to close.
| **Hottest Orders!** | |
Electrical Engineer/Subsea Controls Engineer
| Location: |
Houston, TX |
| Description: |
This company is in need of an Electrical Engineer with experience in High Voltage Subsea Power Distribution/Transmission. This person could also be classified as a Subsea Controls Engineer, but the electrical experience is the key. They want the best available and are willing to compensate well into the 6 figures for the right candidate. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by CB, approved by JH 07/08/09
|
| |
 |
 |
|
Estimator
| Location: |
Houston, TX |
| Description: |
This company is looking for Estimators for a large E&C for contract/hire in Houston TX. Experience with tank estimating is a major plus. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Approved by JH 07/24/09
|
| |
 |
 |
|
Finite Element Analysis (FEA) Specialist
| Location: |
Houston, TX |
| Description: |
One of our top oil field equipment manufacturing clients is looking for a FEA specialist for their worldwide riser group. Must have solid ABAQUS experience on Oil Field equipment with preference given to those with Global Riser experience. This is a very high profile position and they are looking for experience candidates. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by JH, approved by JH 07/08/09
|
| |
 |
 |
|
Flow Assurance Engineer
| Location: |
Houston, Texas |
| Description: |
The job demands an individual who can maintain the conceptual thermal hydraulic design of onshore and offshore pipelines and will evaluate the transient conditions and utilize the knowledge of the evaluation to develop an operating and control strategy for start-up and shut-down. One will analyze hydrodynamic instability and surge, and will manage all aspects of asphaltenes, chemicals, wax, scale, corrosion inhibition, hydrate inhibition, separation, and foaming. One will have direct client exposure, must be able to give advice on flow assurance matters and will work on in-house projects. One must have experience with the steady state thermal hydraulic design of pipelines, pipeline bundles, and flowlines; as well as experience with Olga, Pipesim, or Hysis and modeling of pipe in pipe insulated systems including gas injection and deepwater risers. I’m sorry; at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by PT approved by JH 6/23/09
|
| |
 |
 |
|
Lab Supervisor
| Location: |
Houston, TX |
| Description: |
This company is looking for a Lab Supervisor to run the testing lab in Houston, TX. They will also consider those who have other oil field equipment. Candidate does not need a degree but needs to have some supervisory experience. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Approved by JH 07/24/09
|
| |
 |
 |
|
Mechanical Engineering Consultant, Fitness For Service
| Location: |
Houston, TX |
| Description: |
This company is looking for engineers that have experience in FFS (Fitness for Service) Level 3. One would be onsite in refineries dealing primarily with pressure vessels. Relocation for this position is available, but preference will be given to local candidates. To be considered for this position you must have experience with code API 579.
|
| |
 |
 |
|
Piping Engineer
| Location: |
Houston, Texas |
| Description: |
This position is located on the west side of town with a stable company. The position will include performing design calculations using CFD and pipe stress. You must also be familiar with Caesar and understand the industry standards such as, ASME B31.3, ASME B31.5, ABS, DNV, ASME B & PV Code, NACE, etc. I’m sorry; at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by PT approved by JH 6/23/09
|
| |
 |
 |
|
Power Transmission Engineer
| Location: |
Houston, Texas |
| Description: |
You must have experience with circuit protection, protection device coordination at industrial power levels, commissioning large transformers, VFD’s, switch gears and related equipment, along power transmission and/or distribution at voltages of 4160 VAC and above, at power levels greater than 1000 horse power. One must be experienced with software such as ETAP and/or PSCAD. Experience with offshore/subsea project is preferred, but not required. I’m sorry; at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by PT approved by JH 6/23/09
|
| |
 |
 |
|
Principal Mechanical Engineer (Rotating Equipment)
| Location: |
Houston, Texas |
| Description: |
Minimum requirement of a Bachelors of Science in Mechanical engineering, more than 10 years experience with all technical aspects of rotating equipment such as, blowers, centrifugal pumps, positive displacement pumps, fans, reciprocating compressors, centrifugal and rotary compressors. One will be held responsible for the entire equipment specification cycle and supplier selection. Also will be held responsible for the supplier drawing and document review. I’m sorry; at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by PT approved by JH 6/23/09
|
| |
 |
 |
|
Project Controls Manager
| Location: |
Houston, TX |
| Description: |
This company has an immediate need for Project Controls Managers and Specialists. They need all levels of experience starting at 7 years of experience on large E&C projects in the Oil & Gas industry. Preference will be given to those with over 15 years experience. They will consider either direct hire or contract candidates. This is a Houston based position and there will be no per diem. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates.Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by JH, approved by JH 07/08/09
|
| |
 |
 |
|
SCADA Coordinator
| Location: |
Houston, TX |
| Description: |
This company is in need of a SCADA Coordinator with a large operator in Houston, TX. Candidate does not need to be degreed, but needs 10+ years experience on large and small facilities of all types. Primary responsibilities involve instrumentation, controls, and communications support with emphasis on SCADA systems. The projects range geographically from Alaska to the Gulf of Mexico. This position will interface on a regular basis with IT. Travel to field locations to assist with installs, troubleshooting, programming and commissioning will be part of the job. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Approved by JH 07/24/09
|
| |
 |
 |
|
Senior Instrument Engineer
| Location: |
Houston, Texas |
| Description: |
One would be held responsible for project development, evaluating field development options, managing junior engineers, and provide technical guidance to groups. One must develop cost estimations, budgets, and project schedules, as well as, have a Bachelor of Science in Safety, Process, Mechanical, or Piping engineering. I’m sorry; at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by PT approved by JH 6/23/09
|
| |
 |
 |
|
Structural Engineer
| Location: |
Houston, Texas |
| Description: |
The position is a contract that will last 3-6 months and is located on the west side of town. It involves designing/selecting structural components, systems, and equipment, such as derricks and masts. You must have a Bachelors of Science in Civil or Structural Engineering and have seven to ten years experience. I’m sorry; at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by PT approved by JH 6/23/09
|
| |
 |
 |
|
Subsea Project Manager
| Location: |
Houston, Texas |
| Description: |
You will be responsible for all design, production, installation, and procurement for deepwater structures that include PLETs, PLEM, SEPLA anchors, shallow foundations, suction anchors, manifolds, and jumpers. You must have minimum of 9 years of experience in the deepwater oil and gas industry, as well as, a degree in mechanical, ocean, civil or aerospace engineering. You will need a strong background in structural, mechanical engineering, welding, pipeline installation, corrosion protection, and materials. Being registered as Texas professional engineer is a plus but not a requirement. I’m sorry; at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by PT approved by JH 6/23/09
|
| |
 |
 |
|
Tax Manager
| Location: |
Houston, TX |
| Description: |
This Houston based company is in need of a Tax Manager, dealing exclusively with international issues for an oil field manufacturer. Candidate will not be managing anyone but will have full responsibility in that area. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Approved by JH 07/24/09
|
| |
 |
 |
|
Umbilicals Specialist
| Location: |
Houston, TX |
| Description: |
One of our clients is in need of an umbilical’s specialist to fill this high profile position. Responsibilities include but are not limited to overseeing the successful completion of projects and design engineering in preparation for project execution. One must be ready to coordinate subcontract and vendor management and check, approve and prepare procedures, and ensure that project conforms to appropriate safety standards and carries all necessary safety assessments. One will contribute to the commercial management of the project. You will prepare for spool base activity to load and mobilize vessels, and assist in installation of offshore pipe, or subsea construction activity. Gulf of Mexico (GOM) deepwater projects are a specialty and some international travel (25%) will be required for overseas project assignments. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position.
Written by CB, approved by JH 07/09/09
|
| |
 |
 |
|
|
| *Resume Service* | |
Resume Service for Candidates
| Location: |
Houston |
| Description: |
Resume writing isn’t easy and creating a resume that works for you and not against you is key. Let us show you how a new resume can increase your interview odds in this tight job market. -Are you putting your best foot forward? -Does your resume point out your professional edge? -Is it laid out in a logical format that is easy to read and understand? Our resume service is an excellent option for you because we... *Work closely with all of our Clients for years. When it comes to resumes and specialized skill sets, we know what Hiring Authorities are looking for. *Offer personalized service (based on one on one conversations revolved around your work experience and career goals). *Will work with you until you are satisfied. Email us us today or apply by uploading your resume! Please call 281.578.2400 to follow up if you upload through thiss ite. Thanks!
|
| |
 |
 |
|
|
| Accounting/ Finance | |
Accountant III
| Location: |
Houston |
| Description: |
Bachelor's in Accounting: MBA a plus SEC financial filing (planning, preparation and issuance). Prepare all paperwork for SEC filings. Assist with pension and post-retirement plan accounting and annual audit/financial statements. Quarterly - internal preparation letters, legal contingency review, assist in the quarterly earning reviews. Assist with SOX compliance.
|
| |
 |
 |
|
Accounts Payable
| Location: |
Houston |
| Description: |
We have a Contract-to-hire Accounts Payable position for a subsea engineering firm. You will be responsible for accurate and timely processing of set workload, processing vendor invoices and assist in the preparation of payment runs for all categories of vendors. You will also prepare payment runs and resolve problem invoices. The ideal candidate will have the ability to deal with both internal and external queries in a professional and proactive manner as well as perform other accounting related tasks when required. Good knowledge in Microsoft Office, mainly in Excel. Must be detail oriented and able to meet deadlines. SAP & FileNet experience preferred but not required.
|
| |
 |
 |
|
Accounts Payable
| Location: |
Houston |
| Description: |
Our client builds high-performance mud pumps for oil and gas drilling (on land and offshore). They also provide petroleum production and processing, well-servicing, and horizontal directional drilling services. Currently, they need someone who has a experience with full cycle of payables. No particular software knowledge is required; they will train on their software. It is a very heavy payables-intense position.
|
| |
 |
 |
|
Accounts Receivable
| Location: |
Houston |
| Description: |
Our client is a Houston-based manufacturer with 26 years of producing innovative design solutions, turnkey electrical power systems and custom fabrications. They offer a wide range of products and systems through 38 kilovolts, including complete switchgear, variable frequency AC drives, DC Drive Systems, AC motors and packaged control rooms. You will be working with the Sr. AR Accountant. Must be able to read a sales order and determine any inconsistencies on orders. Your position involves speaking with sales department on any questionable orders. We are looking for someone with the ability to acquire proven results and who demonstrates strong cognitive abilities. General Ledger experience is a must.
|
| |
 |
 |
|
Collection Specialist
| Location: |
Houston |
| Description: |
Collection Specialist needed to implement new collection strategy. Initial goal is to reduce 90-day Accounts Receivable (AR) to 20% of total AR and finally down to 15% of AR. Must have excellent attitude and ability to problem solve creatively about ways to facilitate collections. Will work closely with Project Managers and clients to ensure timely balance collection. Duties also include posting cash receivables and daily reports for management use. Company uses DELTEC software, which they are willing to train someone on. Our client is a multi-discipline, consulting engineering firm, serving both the public and private sectors. With offices in Houston, Austin, San Antonio and The Woodlands, Texas, the staff includes over 325 experienced civil and transportation engineers, hydrologists, land planners, landscape architects, construction managers, designers, technicians and surveyors.
|
| |
 |
 |
|
Controller
| Location: |
Houston |
| Description: |
This position works closely with the Vice President and Chief Financial Officer and is responsible for the overall direction, management and operation of the accounting department. Day to day responsibilities include but are not limited to Accounting, regulatory Compliance, Business Development and Budgeting. As part of the management team, you will be asked to develop department goals, prepare financial reports and manage the investment portfolio. All applicants should have at least a bachelors degree in Finance/Accounting, and be well-versed in general accounting practices, laws regulations and financial procedures.
|
| |
 |
 |
|
Cost Accountant
| Location: |
Houston |
| Description: |
We have a new position with a dynamic client that is ready to hire. They are looking for a Cost Accountant who has material costs, labor costs and inventory maintenance experience. They are looking for someone who has a manufacturing background and can collect data to determine cost of raw materials purchases. You will also be asked to analyze and record results, prepare required banking and financial reports and provide briefs to management. Additional responsibilities include development and installation of a cost accounting system.
|
| |
 |
 |
|
Project Accountant
| Location: |
Houston |
| Description: |
We need a Sr. Project Accountant to set up project Business Units and general ledger accounts in JDE, assure cost standards for all project items and enforce cost-related policies & procedures. You will also participate in the collection, interpretation and reporting of data in transactions and processes, make cost-related recommendations, evaluate profitability, reconcile accounts, and audit customer-owned warehouse. Our client is a major manufacturer in the oil & gas tubular market and the ideal candidates should have experience in a manufacturing environment dealing with complex & large-scale processes involving multi-level bill of materials. They will consider someone with three years of experience if they have strong IT skills. Person should also know Excel & Word and be able to generate and create reports.
|
| |
 |
 |
|
Senior Project Accountant
| Location: |
Houston |
| Description: |
One of our clients is now one of the world's top subsea contractors for the oil and gas industry through a joint venture resulting from the merging of two underwater construction businesses. They have a current opening for someone with a BS in Accounting or Finance and who has project Accounting experience, preferably with ERP and SAP software. Your duties include performing project accounting for multiple projects, preparing and updating monthly project forecasting. You will work closely with the Project Manager to review monthly forecast and results to identify variances from budget. Month-end closing activities include preparation of journal entries, inter-company billing, client billing, and review man hours. On a weekly basis, you will prepare project cash flow and A/R follow-ups.
|
| |
 |
 |
|
Tax Accountant (International and Tax Planning)
| Location: |
Houston |
| Description: |
Accounting Degree (CPA, Masters in Tax or Accounting strongly preferred)Minimum 3-5 years corporate tax experience preferred; mix of public accounting and industry experience is preferred Exposure to U.S. corporate taxation of multinational organizations, including transfer pricing is a definite plusStrong organizational and communication skills Proficiency with Microsoft Excel and Word Continuing professional education in international tax law, international tax planning, tax accounting, and corporate governance. This position deals with the following internal groups in the Finance function: Consolidations, SEC Reporting, Treasury, U.S. and foreign operational controllers and finance personnel. This position deals with U.S. and foreign public auditors, external consultants, and attorneys
|
| |
 |
 |
|
Tax Accountant (Domestic Tax)
| Location: |
Houston |
| Description: |
This person will handle federal income tax returns. They will also be involved in all aspects of FAS 109, and manage SPX Sec 404 compliance and testing. As well manage the preparation and filing of state tax returns.
|
| |
 |
 |
|
Tax Manager
| Location: |
Houston, TX |
| Description: |
This company is looking for a Lab Supervisor to run the testing lab in Houston, TX. They will also consider those who have other oil field equipment. Candidate does not need a degree but needs to have some supervisory experience. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Approved by JH 07/24/09
|
| |
 |
 |
|
|
| Administrative |
|
| Chemical/ Process | |
Mechanical Engineer-Compressor Stations
| Location: |
Houston |
| Description: |
We have a client who specializes in the engineering and management of pipeline systems, including onshore and offshore pipelines and related systems. They have an opening for a Mechanical Engineer for the design & procurement of gas compressor stations. They seek significant experience in hydrocarbon liquid pump stations, meter stations, storage facilities, and oil/gas production facilities. BS in Engineering required, with PE registration is a plus. Your assigned duties include P&IDs, material requisitions, providing QC checks on technical records, mentoring junior staff, and coordinating the control design team.
|
| |
 |
 |
|
Process Engineer
| Location: |
Houston |
| Description: |
Our client needs a LNG Process engineer for computational hydraulic analysis, optimization studies, and simulation preparation for oil, water, gas separation & treatment. You will provide process control requirement for P&IDs, cost estimates on optimization studies and prepare technical specs for process equipment and prime movers. The ideal candidate will have experience with LPG, recovery, dehydration, gas plant design heavy crudes. Software experience is necessary (HYSIS, HYSIM, Pipeline Studio, TLNET, TGNet, Advantica), steady state & transient pipeline hydraulic simulation is also important.
|
| |
 |
 |
|
|
| Civil/ Structural (Onshore &Offshore) | |
Civil/Structural Engineer
| Location: |
Houston |
| Description: |
We have a Civil/Structural position for an engineer with a minimum of 2 years experience all the way to Sr Level. This person will be doing concrete and steel design, with emphasis on the foundations and building/enclosures to house equipment like compressors, vessels, tanks, and pipe supports. Facility engineering is a plus, but not a requirement. This position will be eligible for the overtime bonus program. Our client does all types of pipelines and facilities, including gas, liquid, and products and has been in business since 1961. They do mostly pipeline work, along with telecommunications and Power Distribution.
|
| |
 |
 |
|
Field Engineers
| Location: |
Houston, Oklahoma City, Denver, DFW, Calgary |
| Description: |
We have a fast-growing, international client, firmly established as the industry leader in fracture mapping diagnostics (Microseismic and Tiltmeter). Because of their rapidly expanding businesses they recently built a state-of-the-art office/research facility in Houston. This company often provides engineering consulting, fracture diagnostics and reservoir monitoring technology to its clients. They are currently hiring field engineers that to train as project managers for multiple locations across the United States and Canada including Metropolitan Dallas/Ft. Worth, Oklahoma City, Denver, Colorado and Calgary, Alberta. This position requires technical skills and an interest in fracturing; however, prior fracturing experience is not required. Another of our best clients is looking for Field Engineers with good technical background, and downhole tools experience. You should have an interest in hydraulic fracturing; experience in hydraulic fracturing, Hysim and T-Sweet is a plus.
|
| |
 |
 |
|
Geotechnical Civil/Structural Engineer
| Location: |
Houston |
| Description: |
This is a new position for Geotechnical Structural Engineer who has experience with geotechnical structures, foundations and/or soil mechanics. You will be dealing with the design of foundations and suction piles in reference to mooring systems. Mooring experience would be a big plus. They are looking for someone who can accurately assess makeup of the ground surface and soil for installation of mooring systems. This could also be a civil/structural engineer who specializes in soil mechanics. You will have the benefit of a small company atmosphere with the financial backing of a larger worldwide corporation. All of the engineering and project management are out of the Houston office and they have a very large presence in Louisiana where their manufacturing, operations, and offshore crew is located. They are a full service engineering firm dealing with Mooring and other sub sea installation.
|
| |
 |
 |
|
Sr. Mooring Engineer
| Location: |
Houston |
| Description: |
A fast growing Houston Subsea Installation company is looking for Senior and Junior level Structural and Marine Engineers with FEA, mooring and marine experience such as mud mats, piles, tri pods and casons. Candidates will have an outgoing personality and be able to work well in a small team environment. Moorings experience is preferred but not required. The Senior level position must be able to manage, train and mentor Junior engineers. Those interested in these positions should have good written and verbal skills. The company will also consider Junior level positions with at least two years of experience. This is a very stable company with an even more stable parent company. Their office space is top of the line with window offices for senior engineers.
|
| |
 |
 |
|
Structural Engineer
| Location: |
Houston, Texas |
| Description: |
The position is a contract that will last 3-6 months and is located on the west side of town. It involves designing/selecting structural components, systems, and equipment, such as derricks and masts. You must have a Bachelors of Science in Civil or Structural Engineering and have seven to ten years experience.
|
| |
 |
 |
|
|
| Document Control/ Technical Writing |
|
| Drafter/ Design | |
Designer/Drafter
| Location: |
Houston |
| Description: |
This position is working with the PM on large-scale pipeline projects. They prefer that someone proficient in CADworks, but are willing to consider other software as long as they have 3D experience. You will be working as part of a team to ensure that the project is scheduled and completed correctly. Our client is looking for hard-working individuals who are willing to learn what it takes to be proficient and get the work done. They take care of employees who have the skills and a good work ethic. They do mostly pipeline work, along with telecommunications and Power Distribution and are currently performing engineering, project management and field services for a major multi-billion dollar pipeline systems.
|
| |
 |
 |
|
Designer/Drafters
| Location: |
Houston |
| Description: |
We have a client that is a small company with a big budget because it is under the umbrella of a large international firm. They are looking for Drafters who can create plans for equipment layout, systems and structures for land and offshore rigs. You would be developing detailed drawings for structures like derricks, mast/substructures, frames, skid mounted equipment, piping manifolds and pipeline systems.
|
| |
 |
 |
|
Mechanical Designer
| Location: |
Houston |
| Description: |
Multiple needs in multiple groups for all downhole tool product lines. The key to this position is downhole tools product design/drafting. We have multiple needs for the downhole tools product lines with one of our largest clients. They continues to grow its engineering staff and needs people who have experience with Pro-E and/or 3D solid modeling with downhole tools. It would be great if you already have oilfield experience. Our client has a casual work environment and continues to experience above average growth and profitability.
|
| |
 |
 |
|
Piping Drafter
| Location: |
Houston |
| Description: |
This person will have drafting experience in the field of piping plan, Iso, P&ID, and general plant layout. Experience in developing field sketches and dimensioning is also required. Experience in a refinery/petrochemical work environment is a plus. Responsibilities will involve piping design and general drafting. This individual will work closely with project engineers and other refinery personnel on designing and drafting project requirements.
|
| |
 |
 |
|
Structural Designer
| Location: |
Houston |
| Description: |
One of our fastest growing Clients is a Houston based Engineering and Construction company that specializes in On-shore Pipelines and Gas Distribution Systems. They do everything from the front-end design to the surveying and installation. They have millions of dollars of projects booked and need to increase their engineering staff. They are looking for Designers with a minimum of two years experience. Very experienced designers should consider the opportunity as well. You will be working primarily in the area of concrete and steel design and should have an excellent working knowledge of foundations, building enclosures that house equipment such as compressors, vessels, tanks, and pipe support. They have a lot of work and are looking for someone who likes to stay busy. Their office is centrally located with good quality work spaces and equipment.
|
| |
 |
 |
|
|
| Electrical/ Controls/ Instrumentation | |
Controls Systems Engineer
| Location: |
Houston |
| Description: |
We have a client that needs a Control Systems Engineer with extensive hardware experience. The ideal person is a EE who has knowledge of subsea systems, design and applicable codes. The important duties are PLC programming, and embedded software, particularly being able to program the hardware associated with control systems. You need to have electronics and or hydraulic design experience also. They will be responsible for R&D, drafting some manufacturing of valves, chokes, manifolds and skid-mounted equipment. Anyone with subsea tree and/or intervention experience is a plus.
|
| |
 |
 |
|
Electrical Engineer
| Location: |
Houston |
| Description: |
Very stable company with very good benefits, headquartered in West Houston needs an Electrical Engineer to design detailed electrical systems on jack up drilling rigs, dynamic positioning semi-submersibles, drilling vessels and FPSOs. Some of your duties include drawing review and approval for power generation & distribution systems, preparing equipment specs and performing technical evaluation of equipment. You will be working in the the group that designs and modifies of jack up and semi submersible drilling units.
|
| |
 |
 |
|
Electrical Engineer
| Location: |
Houston |
| Description: |
Great opportunity for an Electrical Engineer to design high-temp electronics for drilling tools for MWD/LWD drilling tools. You will also write and debug DSP and microcontroller firmware for embedded system. Experience with target processors, microchip PIC, Analog Devices DSP is a must. FPGA design experience is also necessary. Will also be writing C code for target hardware. Should be able to operate lab equipment (emulators, oscilloscopes, spectrum analyzers, network analyzers).
|
| |
 |
 |
|
Electrical Engineer/Subsea Controls Engineer
| Location: |
Houston, TX |
| Description: |
This company is in need of an Electrical Engineer with experience in High Voltage Subsea Power Distribution/Transmission. This person could also be classified as a Subsea Controls Engineer, but the electrical experience is the key. They want the best available and are willing to compensate well into the 6 figures for the right candidate. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by CB, approved by JH 07/08/09
|
| |
 |
 |
|
Power Transmission Engineer
| Location: |
Houston, Texas |
| Description: |
You must have experience with circuit protection, protection device coordination at industrial power levels, commissioning large transformers, VFD’s, switch gears and related equipment, along power transmission and/or distribution at voltages of 4160 VAC and above, at power levels greater than 1000 horse power. One must be experienced with software such as ETAP and/or PSCAD. Experience with offshore/subsea project is preferred, but not required.
|
| |
 |
 |
|
SCADA Coordinator
| Location: |
Houston, TX |
| Description: |
This company is in need of a SCADA Coordinator with a large operator in Houston, TX. Candidate does not need to be degreed, but needs 10+ years experience on large and small facilities of all types. Primary responsibilities involve instrumentation, controls, and communications support with emphasis on SCADA systems. The projects range geographically from Alaska to the Gulf of Mexico. This position will interface on a regular basis with IT. Travel to field locations to assist with installs, troubleshooting, programming and commissioning will be part of the job. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Approved by JH 07/24/09
|
| |
 |
 |
|
Senior Instrument Engineer
| Location: |
Houston, Texas |
| Description: |
One would be held responsible for project development, evaluating field development options, managing junior engineers, and provide technical guidance to groups. One must develop cost estimations, budgets, and project schedules, as well as, have a Bachelor of Science in Safety, Process, Mechanical, or Piping engineering.
|
| |
 |
 |
|
|
| Engineering Support | |
Lab Supervisor
| Location: |
Houston, TX |
| Description: |
This company is looking for a Lab Supervisor to run the testing lab in Houston, TX. They will also consider those who have other oil field equipment. Candidate does not need a degree but needs to have some supervisory experience. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Approved by JH 07/24/09 Manufacturing, engine support, misc
|
| |
 |
 |
|
SCADA Coordinator
| Location: |
Houston, TX |
| Description: |
This company is in need of a SCADA Coordinator with a large operator in Houston, TX. Candidate does not need to be degreed, but needs 10+ years experience on large and small facilities of all types. Primary responsibilities involve instrumentation, controls, and communications support with emphasis on SCADA systems. The projects range geographically from Alaska to the Gulf of Mexico. This position will interface on a regular basis with IT. Travel to field locations to assist with installs, troubleshooting, programming and commissioning will be part of the job. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Approved by JH 07/24/09
|
| |
 |
 |
|
|
| Executive/ Management | |
Chief Pipeline Engineer
| Location: |
Houston |
| Description: |
We have an opening for a Chief Engineer with successful supervisory experience and proven ability to provide leadership to large groups. This position reports directly to the Manager of Engineering. You should have at least 15 years of relevant international experience managing pipeline design projects. As Chief Engineer you may work on selected projects or may perform certain design functions. You may also be required to assist with proposal preparation and provide recommendations of personnel for a proposed project.
|
| |
 |
 |
|
Civil/Structural Manager
| Location: |
Houston |
| Description: |
This Company is looking at engineers with a minimum of 2 years experience, with a preference for someone in the 4-8 year range. This person will be doing concrete and steel design, with emphasis on the foundations and building/enclosures to house equipment like compressors, vessels, tanks, and pipe supports. Facility engineering is a plus, but not a requirement. This Company does all types of pipelines and facilities, including gas, liquid, and products. This position will be eligible for their Overtime bonus program. Experience with Concrete and Steel Design, foundations for equipment, building enclosures for Compressors, vessels, tanks, and pipe supports a plus.
|
| |
 |
 |
|
Gas Storage Engineer Manager
| Location: |
Houston, Texas |
| Description: |
This is a high profile position that has minimal supervision and only requires regular reports to the V.P. of Operations. The job responsibilities deal with gas storage monitoring, evaluation, optimization and gas storage inventory management. One will be responsible for the analysis and performance optimization of both salt caverns and reservoirs. Also, one will have the task of managing engineering contractors/vendors, as well as, play a support role in the company’s efforts for acquisitions of operating assets. In order to qualify for the job one must have a Bachelor of Science degree in engineering, must have seven to ten years experience with gas reserves and three or more years experience in management.
|
| |
 |
 |
|
Manager of Engineering
| Location: |
Houston |
| Description: |
This opening is for a Manager of Engineering, who will perform a supervisory role over several engineering disciplines. This position has strong expectations for managing the workforce and less emphasis on engineering duties and functions. You will be heavily involved in staffing, training, evaluating, and recruiting to fill the departments. Must know industry standards and be prepared to establish new quality goals for company. Must also have knowledge of engineering software and be able to use and direct other with integration of software in projects. This client has a well established and respected position within the pipeline industry. They have been operation for more than 50 years. There is great opportunity career advancement and professional growth.
|
| |
 |
 |
|
QHSE Director
| Location: |
Houston |
| Description: |
Duties will include executive management and coordination of the Quality Management and HSE programs and functions for the Comapny, including office locations in the US, Brazil; Angola; Norway; and the UK. - Undergraduate degree required; - Basic computer knowledge (E:Mail, Word, Excel, PowerPoint, etc.); - Ability to state clearly (compose detailed reports and documents); - Ability to promptly handle and prioritize multiple detailed tasks simultaneously; - Ability to interact with internal and outside customers in a professional manner; - Knowledge of and experience with ISO 9001:2000 implementation, administration and auditing; - Knowledge of and experience with safety management, training and incident reporting; - Ability to understand company goals and objectives and develop QHSE activities to meet same; - Good organizational skills; time and stress management skills; - Ability to effectively motive and empower personnel; - Ability to effectively deal with conflict resolution; - Experience managing personnel; - Willingness to travel.Looking for a person with 10+ yrs experience.
|
| |
 |
 |
|
Subsea Project Manager
| Location: |
Houston, Texas |
| Description: |
You will be responsible for all design, production, installation, and procurement for deepwater structures that include PLETs, PLEM, SEPLA anchors, shallow foundations, suction anchors, manifolds, and jumpers. You must have minimum of 9 years of experience in the deepwater oil and gas industry, as well as, a degree in mechanical, ocean, civil or aerospace engineering. You will need a strong background in structural, mechanical engineering, welding, pipeline installation, corrosion protection, and materials. Being registered as Texas professional engineer is a plus but not a requirement.
|
| |
 |
 |
|
Tax Manager
| Location: |
Houston, TX |
| Description: |
This Houston based company is in need of a Tax Manager, dealing exclusively with international issues for an oil field manufacturer. Candidate will not be managing anyone but will have full responsibility in that area. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Approved by JH 07/24/09
|
| |
 |
 |
|
|
| Human Resources | |
Executive Compensation & Benefits Mgr
| Location: |
Houston |
| Description: |
Compensation and benefits experience a must. SEC filing experience preferred. This person will be handling executive and director compensation, benefits and stock plans. This person will also assist the company's SEC attorney as well as be responsible for SEC fillings.
|
| |
 |
 |
|
HR Representative
| Location: |
Houston |
| Description: |
LJA Engineering # Immediate need for an HR Rep to be responsible for HR inquiries, employee relations, compliance & training. You will provide professional support recruiting and employment. Person should have strong written and oral communication skills as well as strong organizational skills. Should be deadline oriented. Will be asked to handle confidential information and should be very proficient in MS Word, Excel, Outlook.We have another client looking for an HR Representative to administer payroll, compensation administration, and benefits. You will also be asked to perform recruiting and staffing, employment law, affirmative action and employee relations duties. This position requires at least 2 years of experience with an associates degree or at least four years of experience with no degree
|
| |
 |
 |
|
|
| Internal- SiliconCantera |
|
| IT/ Software Engineering | |
GID Programmer
| Location: |
Houston |
| Description: |
5-20 yrs experience Skills needed: GIS Programming Visual Basic (VB) .net and C+ ESRI or Blus Sky experience Applications development in a GIS environment using Microsoft languages This is a very senior computer programmer for the GIS department using Microsoft Products.
|
| |
 |
 |
|
GIS Programmer
| Location: |
Houston |
| Description: |
5-20+ Years Experience This person will be a Sr. Computer Programmer within this company's GIS Department. Experience with Visual Basic, .net and C+. preferred as well as experience with ESRi or Blue Sky.
|
| |
 |
 |
|
SCADA Engineer
| Location: |
Houston |
| Description: |
This is a high end engineering position where you will take basic customer requirements and end user goals to spec out SCADA systems including applicable hardware. You will be working with remote and automation systems like Totalflow, Fisher Rock
|
| |
 |
 |
|
Software Engineer
| Location: |
San Francisco |
| Description: |
Software development position implementing unified data acquisition, analysis and graphing applications for geotechnical monitoring instruments on a Windows platform. Responsibilities include desktop application development and instrument control. Design and implement highly-usable software applications for data acquisition, analysis and reporting. Code and test software that meets design specifications. Work with project and product management to implement objectives. Help review and clarify functionality and performance of software requirements. Design and implement code and document design decisions. Perform unit testing and defect fixing. Develop software that meets project specs and quality goals.Programming experience with Visual Studio using C# or C++ Experience with multi-threaded applications; with SQL databases and knowledge of OpenGL Experience with OOD and UML modeling techniques and with instrument or device control a plus. BSCS with 5-10 years experience.
|
| |
 |
 |
|
|
| Manufacturing (Engineering/ Production/ Assembly) | |
Lab Supervisor
| Location: |
Houston, TX |
| Description: |
This company is looking for a Lab Supervisor to run the testing lab in Houston, TX. They will also consider those who have other oil field equipment. Candidate does not need a degree but needs to have some supervisory experience. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Approved by JH 07/24/09
|
| |
 |
 |
|
Manufacturing Manager
| Location: |
Houston |
| Description: |
BSME or IE with 8+ yrs experience Must be Six Sigma Certified with Lean Manufacturing Experience Mgmt experience, and Documented Lean Mfg Training This person will be leading the production and manufacturing for the department in Spring as well as directing the Lean Six Sigma program throughout the company. This person should also have experience operating in a low-volume, large SKU range, machine-shop environment where precision metal working, assembly and testing is involved.
|
| |
 |
 |
|
|
| Mechanical/ Applications Engineering | |
Applications Engineer-Technical Specialist
| Location: |
Houston |
| Description: |
A company with a great environment with escalating growth and profitability has an immediate opening for an Applications Engineer with very strong technical aptitude. This is a technical, not a sales position for the Expandables Group, including cased hole, open hole and solid expandables. This person will have to have strong technical understanding of the capabilities and limitations of downhole & wellbore products. They have to be able to come up with viable solutions and uncover risks of expanding the wellbore in many different environments. This means determining environmental stability and matching right tool with the appropriate drilling mechanics. Ideal candidates will have at least seven years of experience a BS in Mechanical or Petroleum Engineering.
|
| |
 |
 |
|
Engineer III
| Location: |
Houston |
| Description: |
One of our Clients is currently looking to fill a position for an Engineer to work in their extensive manufacturing facility. They need someone who can design pressure control products in accordance with API/NSME/ and NACE industry standards. The ideal candidate will have at least 5 years of oilfield equipment design experience and the preference is to be proficient in ProE and 3DCAD. This company uses JD Edwards software for design and testing its connectors and control products. They do much of their work here in Houston where you will be involved directly in the manufacturing process.
|
| |
 |
 |
|
Engineer in Charge
| Location: |
Houston |
| Description: |
Skills preferred: Wireline operations and drilling experience Previous supervisory experience Experience with having P&L responsibility Advanced knowledge of wireline services This person will have direct or indirect responsibility for all personnel at location. Assist the District Manager in determining need for equipment and supplies and maintains appropriate levels of inventory. Schedule supervisors and is responsible for the accuracy and timeliness of their work, reports, and expenses. Perform any service, repair, or maintenance task necessary when "hands on" assistance is needed including field duty. Oversee general maintenance of equipment and facility. Maintain adequate, trained, and motivated staff of district personnel and insure compliance with Company personnel policies and all governmental health, safety, and fair employment practices. Approves all financial documents as directed by the district manager for accuracy including purchase orders, invoices, expense reports, and petty cash transactions. Designate duties for shop personnel including the repair of damaged equipment. Assure that machinery, tools, equipment, and facilities are properly maintained. Available on a 24 hours call basis to respond to customer needs. With assistance from HR: recruit, hire, train staff, evaluate employee performance, and recommend or initiate promotions, transfers, and disciplinary action BSME, PE, or 5+ years experience w/o a degree.
|
| |
 |
 |
|
Finite Element Analysis (FEA) Specialist
| Location: |
Houston, TX |
| Description: |
One of our top oil field equipment manufacturing clients is looking for a FEA specialist for their worldwide riser group. Must have solid ABAQUS experience on Oil Field equipment with preference given to those with Global Riser experience. This is a very high profile position and they are looking for experience candidates. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by JH, approved by JH 07/08/09
|
| |
 |
 |
|
Fracturing Engineers
| Location: |
Houston |
| Description: |
We have an exciting and huge need for fracturing engineers with 2-7 years of experience. Our client has a large backlog of work and is ready to hire experienced and relatively inexperienced engineers alike to get the work done. This is a great company; it is a private, fast growing company that is firmly established as the industry leader in fracture mapping diagnostics (Microseismic and Tiltmeter). They are rapidly expanding their businesses and have recently built a state-of-the-art office/research facility in Houston.
|
| |
 |
 |
|
Hydraulics Engineer
| Location: |
Houston |
| Description: |
If you are a degreed mechanical engineer with production, drilling and controls experience, this could be an excellent opportunity for you. Our client is a $500 mil per year engineering and manufacturing service company that provides subsea and surface capital drilling equipment. They have their own state of the art full service manufacturing facility right here in Houston.
|
| |
 |
 |
|
Lead Structural Engineer
| Location: |
Houston |
| Description: |
Very stable company with very good benefits, headquartered in West Houston has an immediate need for a Structural Engineer to plan and coordinate engineering activities and specific projects from inception to final product. Project duties require complete scope from customer interaction to cost control. Your responsibilities include completion of engineering packages, coordinate project schedules, manpower requirements, and using technical information and data to determine methods for material and design optimization. You will work in close cooperation with the Design and Drafting teams to translate engineering from design to drawing and specs and report directly to the Group Lead Engineer and indirectly to the Project Engineering manager.
|
| |
 |
 |
|
Liner Hangers Sustaining Engineer
| Location: |
Houston |
| Description: |
We are looking for Sustaining Engineers with Liner Hanger and or downhole tool experience for one of Houston
|
| |
 |
 |
|
Mechanical Design Engineer
| Location: |
Houston |
| Description: |
If you have experience with casing, wireline, or behind casing, you should consider this opportunity with one of our clients. You will be responsible for equipment design for downhole applications, including performing calculations, drawings, estimating, scheduling. Our clients is looking for someone with software experience like SolidWorks 3D modeling and AutoCAD. PDMWorks or PLM is a plus.
|
| |
 |
 |
|
Mechanical Engineer Metallurgist
| Location: |
Houston |
| Description: |
Provide advice and support in the Metallurgy field. Create Material Selection Guides for various projects 20+ years as a Metallurgist
|
| |
 |
 |
|
Mechanical Engineer Static Equip/ Pressure Vessels
| Location: |
Houston |
| Description: |
This person will handle equipment selection and specification, detail design, bid evaluation and vendor document review for heat exchangers, tanks, and pressure vessels. They will work in accordance with broad technical guidelines and with minimal supervision. Ability to work to tight deadlines and prioritisation of work to achieve them necessary. - Experienced in the specification, design, purchase, and documentation of static mechanical equipment. - Mechanical Engineering Degree required - Knowlegde of ASME Section VIII, Division 1 and 2 Codes required - +10 years Mechanical design experience in the Petrochemical and Gas environment - Working knowledge of Compress Software a plus
|
| |
 |
 |
|
Mechanical Engineering Consultant, Fitness For Service
| Location: |
Houston, TX |
| Description: |
This company is looking for engineers that have experience in FFS (Fitness for Service) Level 3. One would be onsite in refineries dealing primarily with pressure vessels. Relocation for this position is available, but preference will be given to local candidates. To be considered for this position you must have experience with code API 579.
|
| |
 |
 |
|
Pipe Stress Engineer
| Location: |
Houston |
| Description: |
Skills needed: Refinery experience in stress analysis Must be proficient using Caesar II stress program and manual calculations and checking analysis of other engineers. Responsible for project schedule to meet piping milestones. Responsible to Piping Lead Engineer for manpower projections. Responsible for design of spring hangers and for procurement activities required to order springs.
|
| |
 |
 |
|
Pipe Stress Engineer
| Location: |
Houston |
| Description: |
Pipe Stress Engineer to perform stress calculations using Ceasar II. You must be fluent in using Caesar II Pipe Stress Analysis software. You should also have additional general experience so that you can take an active role in specifying piping materials, reviewing piping installation drawings, etc. PE license, would be desirable.
|
| |
 |
 |
|
Principal Engineer-Solid Expandables
| Location: |
Houston |
| Description: |
Our client needs engineers with solid mechanical design and FEA experience for a Sr. level position in their R&D department. The key to this position is experience with SolidWorks and other 3D design software. It is a plus if you already have supervisory experience because you will be mentoring younger engineers and managing a team that tests and manufactures connectors, valves and gauges. This client has an international presence so your potential for growth is unlimited.
|
| |
 |
 |
|
Principal Mechanical Engineer (Rotating Equipment)
| Location: |
Houston, Texas |
| Description: |
Minimum requirement of a Bachelors of Science in Mechanical engineering, more than 10 years experience with all technical aspects of rotating equipment such as, blowers, centrifugal pumps, positive displacement pumps, fans, reciprocating compressors, centrifugal and rotary compressors. One will be held responsible for the entire equipment specification cycle and supplier selection. Also will be held responsible for the supplier drawing and document review.
|
| |
 |
 |
|
Riser Engineer
| Location: |
Houston |
| Description: |
A Houston engineering firm with significant subsea project experience is looking for Riser Engineers for its location near the Intercontinental Airport. This company has just completed a large build out of its facility and now is ready to fill it with top-notch engineers. Ideal candidates should have SCR experience and have been in the industry for at least five years. The are also looking for engineers with strong Flexible Riser experience who have both technical knowledge and the ability to talk to clients. If you have both design and analysis experience you could be a great fit for the company. You will be part of a very strong team of engineers from all disciplines working for a very stable and growing company.
|
| |
 |
 |
|
Sr. & Jr. Mechanical Engineers
| Location: |
Houston |
| Description: |
We need an engineer with at least eight years of experience in downhole tools and with fishing tools experience. The junior level engineer also needs to have downhole tool experience, but you should consider that you might be a fit for the position even if you do not have fishing tools experience. Our client has immediate needs and is ready to fill this position right away with the right engineer. All candidates should be BSME.
|
| |
 |
 |
|
|
| Miscellaneous | |
Finite Element Analysis (FEA) Specialist
| Location: |
Houston, TX |
| Description: |
One of our top oil field equipment manufacturing clients is looking for a FEA specialist for their worldwide riser group. Must have solid ABAQUS experience on Oil Field equipment with preference given to those with Global Riser experience. This is a very high profile position and they are looking for experience candidates. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by JH, approved by JH 07/08/09
|
| |
 |
 |
|
Flow Assurance Engineer
| Location: |
Houston, Texas |
| Description: |
The job demands an individual who can maintain the conceptual thermal hydraulic design of onshore and offshore pipelines and will evaluate the transient conditions and utilize the knowledge of the evaluation to develop an operating and control strategy for start-up and shut-down. One will analyze hydrodynamic instability and surge, and will manage all aspects of asphaltenes, chemicals, wax, scale, corrosion inhibition, hydrate inhibition, separation, and foaming. One will have direct client exposure, must be able to give advice on flow assurance matters and will work on in-house projects. One must have experience with the steady state thermal hydraulic design of pipelines, pipeline bundles, and flowlines; as well as experience with Olga, Pipesim, or Hysis and modeling of pipe in pipe insulated systems including gas injection and deepwater risers.
|
| |
 |
 |
|
HVAC Engineer
| Location: |
Houston |
| Description: |
We have an HVAC position for an engineer with 7 to 10 years of commercial management experience. PE certification is required. This position will be doing design and project management of commercial HVAC engineering projects. You could eventually be looked at to head the mechanical department of the company. The company is located on the west side of Houston. They have been in business for 30 years and are really starting to grow rapidly. Currently they have more projects than manpower. If you would like to work in a close environment, this position; however, they expect to double in size over the next year.
|
| |
 |
 |
|
Lab Supervisor
| Location: |
Houston, TX |
| Description: |
This company is looking for a Lab Supervisor to run the testing lab in Houston, TX. They will also consider those who have other oil field equipment. Candidate does not need a degree but needs to have some supervisory experience. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Approved by JH 07/24/09
|
| |
 |
 |
|
Marketing & Special Project Coordinator
| Location: |
Houston |
| Description: |
We have an exciting vacancy created by someone who was promoted to a global position. Our client is looking for a person who has well-rounded oilfield experience, but may not be an engineer to manage work with multiple business units, corporate marketing and communications groups for one of the Global Business Units (GBU). You will be working on marketing and product releases including product catalogue updates and maintenance, code catalog updates and maintenance, developing and publishing product line brochures and bulletins. This position also has Regional responsibilities to provide Help Desk design responses and support to the Technical & Sales Support Group (T&SSG). Interested persons should be extremely competent with computers and have experience with SubPUMP, Word, Excel, Power Point.
|
| |
 |
 |
|
Mechanical Engineering Consultant, Fitness For Service
| Location: |
Houston, TX |
| Description: |
This company is looking for engineers that have experience in FFS (Fitness for Service) Level 3. One would be onsite in refineries dealing primarily with pressure vessels. Relocation for this position is available, but preference will be given to local candidates. To be considered for this position you must have experience with code API 579.
|
| |
 |
 |
|
Piping Engineer
| Location: |
Houston, Texas |
| Description: |
This position is located on the west side of town with a stable company. The position will include performing design calculations using CFD and pipe stress. You must also be familiar with Caesar and understand the industry standards such as, ASME B31.3, ASME B31.5, ABS, DNV, ASME B & PV Code, NACE, etc.
|
| |
 |
 |
|
Power Transmission Engineer
| Location: |
Houston, Texas |
| Description: |
You must have experience with circuit protection, protection device coordination at industrial power levels, commissioning large transformers, VFD’s, switch gears and related equipment, along power transmission and/or distribution at voltages of 4160 VAC and above, at power levels greater than 1000 horse power. One must be experienced with software such as ETAP and/or PSCAD. Experience with offshore/subsea project is preferred, but not required.
|
| |
 |
 |
|
Principal Mechanical Engineer (Rotating Equipment)
| Location: |
Houston, Texas |
| Description: |
Minimum requirement of a Bachelors of Science in Mechanical engineering, more than 10 years experience with all technical aspects of rotating equipment such as, blowers, centrifugal pumps, positive displacement pumps, fans, reciprocating compressors, centrifugal and rotary compressors. One will be held responsible for the entire equipment specification cycle and supplier selection. Also will be held responsible for the supplier drawing and document review.
|
| |
 |
 |
|
Production Planner
| Location: |
Houston |
| Description: |
Plans and prepares production schedules for the manufacturing of Ball Valves. Draws up master schedule to establish sequence and lead time of each operation to meet shipping dates according to sales forecasts or customer orders. Analyzes production specifications and plant capacity data and performs mathematical calculations to determine manufacturing processes, tools, and human resource requirements. Plans and schedules workflow for each department and operation according to previously established manufacturing sequences and lead times and sequence of fabrication, assembly, installation, and other manufacturing operations for guidance of production workers. Expedites operations that delay schedules and alters schedules to meet unforeseen conditions. Prepares production reports. lists of required materials, tools, and equipment and purchase orders to obtain materials, tools, and equipment.BA or higher or two years related experience
|
| |
 |
 |
|
Project Controls Manager
| Location: |
Houston, TX |
| Description: |
This company has an immediate need for Project Controls Managers and Specialists. They need all levels of experience starting at 7 years of experience on large E&C projects in the Oil & Gas industry. Preference will be given to those with over 15 years experience. They will consider either direct hire or contract candidates. This is a Houston based position and there will be no per diem. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates.Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by JH, approved by JH 07/08/09
|
| |
 |
 |
|
QHSE Director
| Location: |
Houston |
| Description: |
Duties will include executive management and coordination of the Quality Management and HSE programs and functions for the Comapny, including office locations in the US, Brazil; Angola; Norway; and the UK. - Undergraduate degree required; - Basic computer knowledge (E:Mail, Word, Excel, PowerPoint, etc.); - Ability to state clearly (compose detailed reports and documents); - Ability to promptly handle and prioritize multiple detailed tasks simultaneously; - Ability to interact with internal and outside customers in a professional manner; - Knowledge of and experience with ISO 9001:2000 implementation, administration and auditing; - Knowledge of and experience with safety management, training and incident reporting; - Ability to understand company goals and objectives and develop QHSE activities to meet same; - Good organizational skills; time and stress management skills; - Ability to effectively motive and empower personnel; - Ability to effectively deal with conflict resolution; - Experience managing personnel; - Willingness to travel.Looking for a person with 10+ yrs experience.
|
| |
 |
 |
|
Quality Control Team Lead
| Location: |
Houston |
| Description: |
This is a supervisory role for the Quality Control and Supplier Development programs. The goal is to reduce, minimize and prevent defective materials from entering assembly cycle through conducting Root Cause/Corrective Action investigations. You will create improvement and inspection processes, & metrics, identify non-productive tends, refine supplier reliability, and mentor inspectors. It is a plus if you have the following certifications: ASQ-CQE, CSQE, CRE, Quality Manager Certification.
|
| |
 |
 |
|
SCADA Coordinator
| Location: |
Houston, TX |
| Description: |
This company is in need of a SCADA Coordinator with a large operator in Houston, TX. Candidate does not need to be degreed, but needs 10+ years experience on large and small facilities of all types. Primary responsibilities involve instrumentation, controls, and communications support with emphasis on SCADA systems. The projects range geographically from Alaska to the Gulf of Mexico. This position will interface on a regular basis with IT. Travel to field locations to assist with installs, troubleshooting, programming and commissioning will be part of the job. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Approved by JH 07/24/09
|
| |
 |
 |
|
Welding Engineer
| Location: |
Houston |
| Description: |
One of our clients needs a Welding Engineer to create specs using Procedure Qualification Record (PQR) and verify that specs meet Engineering Department standards as well as ASME, API, NACE requirements. Your duties include support of and troubleshooting weld shop concerns, reviewing and establishing welding floor best practices and techniques. Support of weld shop includes dispositioning (or evaluating) Nonconformity Reports (NCRs). This is a great opportunity because they will consider someone with less experience if they meet other qualifications. It is essential to have some experience with or knowledge of following processes: Shielded Metal Arc Welding (SMAW), Shielded Arc Welding (SAW), Flux Core Arc Welding (FCAW), Gas Tungsten Arc Welding (GTAW), and Gas Metal Arc Welding (GMAW). We have another client who is also looking for a Sr. level Welding Engineer to write weld procedures and manage vendor relationships. You will also be implementing welding automation, selection of the equipment and creation of best practices for the new processes.
|
| |
 |
 |
|
Welding Inspector
| Location: |
Houston |
| Description: |
Quality Control Inspectors with AWS certification may want to consider this opportunity to work for a Houston-based manufacturer with 26 years of producing innovative design solutions, turnkey electrical power systems and custom fabrications. This company offers a wide range of products and systems through 38 kilovolts, including complete switchgear, variable frequency AC drives, DC Drive Systems, AC motors and packaged control rooms. In addition to being manufactured completely in house, every product and system is fully load-tested in the $5 million testing facility.
|
| |
 |
 |
|
Wireline Technician
| Location: |
Casper |
| Description: |
Associates or Bachelors degree in electronic technology or specialized training and experience equivalent to degree. Skills needed: Experience in the Wireline Services industry as a technician. Exposure to explosives, high pressure well bore environments and ionizing radiation. Cased hole tools: pulsed neutron, cement bond, sector bond, Flexstak. This person will be subject to "on-call" hours 24 hours a day, 7 days a week. Candidate will maintain cased hole well logging equipment. Troubleshoot and repair surface systems and down hole tools. Recommend changes in circuitry. Establish standard test procedures, conduct functional, operational and environmental tests. Maintain equipment maintenance files and preform reliability analysis.
|
| |
 |
 |
|
Wireline Technician
| Location: |
Grand Junction |
| Description: |
Associates or Bachelors degree in electronic technology or specialized training and experience equivalent to degree. Skills needed: Experience in the Wireline Services industry as a technician. Exposure to explosives, high pressure well bore environments and ionizing radiation. Cased hole tools: pulsed neutron, cement bond, sector bond, Flexstak. This person will maintain cased hole well logging equipment. Troubleshoot and repair surface systems and down hole tools. Recommend changes in circuitry. Establish standard test procedures, conduct functional, operational and environmental tests. Maintain equipment maintenance files and preform reliability analysis.
|
| |
 |
 |
|
|
| Offshore/ Subsea Engineering | |
Sr. Riser Engineer
| Location: |
Houston |
| Description: |
Our client is looking for Sr. Riser Engineers with deepwater riser project experience for consulting and supervisory work on risers and other subsea technology. This company is a small, international firm with six locations worldwide and a growing presence in the Houston area. You duties would include significant client and business development in addition to your engineering work. The ideal candidate has at least 10 years of experience in areas such as riser & casting configuration, operability analysis, failure investigation, optimization and down-time evaluation. As this is a supervisory position, you will also have an opportunity to lead teams, delegate work-flow, approve designs and mentor other engineers.
|
| |
 |
 |
|
Asset Project Manager
| Location: |
Houston, Texas |
| Description: |
One of our clients is well known for cutting edge floating and fixed riser systems and rigs in the GOM. This Asset Project Manager position includes riser monitoring, analysis. They are looking for someone who can efficiently execute offshore projects, who is good with clients and who can manage capital expenditure budgets. This is a great opportunity for someone who wants to move into project management because they will be able to learn from three Asset Managers before taking sole control of projects. Our client is a dynamic engineering company focusing on riser systems for deepwater and ultra deepwater oil & gas developments.
|
| |
 |
 |
|
Electrical Engineer/Subsea Controls Engineer
| Location: |
Houston, TX |
| Description: |
This company is in need of an Electrical Engineer with experience in High Voltage Subsea Power Distribution/Transmission. This person could also be classified as a Subsea Controls Engineer, but the electrical experience is the key. They want the best available and are willing to compensate well into the 6 figures for the right candidate. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by CB, approved by JH 07/08/09
|
| |
 |
 |
|
Flow Assurance Engineer
| Location: |
Houston, Texas |
| Description: |
The job demands an individual who can maintain the conceptual thermal hydraulic design of onshore and offshore pipelines and will evaluate the transient conditions and utilize the knowledge of the evaluation to develop an operating and control strategy for start-up and shut-down. One will analyze hydrodynamic instability and surge, and will manage all aspects of asphaltenes, chemicals, wax, scale, corrosion inhibition, hydrate inhibition, separation, and foaming. One will have direct client exposure, must be able to give advice on flow assurance matters and will work on in-house projects. One must have experience with the steady state thermal hydraulic design of pipelines, pipeline bundles, and flowlines; as well as experience with Olga, Pipesim, or Hysis and modeling of pipe in pipe insulated systems including gas injection and deepwater risers.
|
| |
 |
 |
|
Lead Subsea Engineer
| Location: |
Houston |
| Description: |
We have a high level position for a Subsea Engineer who can supervise major project teams. Our client is a small, but growing, international firm who needs a go-to person for review and approval of subsea designs and project management. You would be working with a team of highly skilled engineers to develop more clients and contacts in the subsea and other vertically related industries including developing bid packages and increasing business in the Houston and GOM area.
|
| |
 |
 |
|
Pipeline Team Lead
| Location: |
Houston |
| Description: |
We need a Lead position for an engineer with pipeline/pipe-lay analysis, riser and pipeline field experience. Areas that you will be working in include route optimization, material/insulation selection, mechanical design, Span analysis, thermal expansion, hydrodynamic force calculations, stability analysis. This position requires at least 10 years of industry experience because you will also supervise and train junior staff members, conduct concept & feasibility studies, FEED packages, and bid packages. There are also Project Management duties with an emphasis on cost, delivery and scheduling. This firm is a growing world-class organization with an excellent reputation within the subsea industry. The work at this firm is very hands-on and the culture is business casual.
|
| |
 |
 |
|
Power Transmission Engineer
| Location: |
Houston, Texas |
| Description: |
You must have experience with circuit protection, protection device coordination at industrial power levels, commissioning large transformers, VFD’s, switch gears and related equipment, along power transmission and/or distribution at voltages of 4160 VAC and above, at power levels greater than 1000 horse power. One must be experienced with software such as ETAP and/or PSCAD. Experience with offshore/subsea project is preferred, but not required.
|
| |
 |
 |
|
Principal Mechanical Engineer (Rotating Equipment)
| Location: |
Houston, Texas |
| Description: |
Minimum requirement of a Bachelors of Science in Mechanical engineering, more than 10 years experience with all technical aspects of rotating equipment such as, blowers, centrifugal pumps, positive displacement pumps, fans, reciprocating compressors, centrifugal and rotary compressors. One will be held responsible for the entire equipment specification cycle and supplier selection. Also will be held responsible for the supplier drawing and document review.
|
| |
 |
 |
|
Riser Engineer
| Location: |
Houston |
| Description: |
The person in this position will be involved in R&D and manufacturing of drilling risers. This position could lead to a supervisory role.
|
| |
 |
 |
|
Sr. Drilling/TTR Engineer
| Location: |
Houston |
| Description: |
Sr. Drilling Engineers are needed for a subsea firm that designs risers and integrated field equipment. This firm offers a wide rage of project services including FEED, equipment qualification, project management and procurement support. You would be part of a team designing and verifying designs of top tension risers including stress/fatigue tests and modeling. One of your major duties would be to perform consulting duties on all subsea projects. The key to this position is being able to monitor TTR projects while keeping site of delivery, costs, and scheduling.
|
| |
 |
 |
|
Structural Riser Engineer
| Location: |
Houston |
| Description: |
Structural Riser Engineers are needed for riser & casing configuration, operability analysis, failure investigation and riser monitoring for in the Houston area. Our client is growing so rapidly that they are looking to fill at least four engineers in this capacity. Our client works with major operators like Exxon/Mobile & Chevron/Texaco designing water injection, gas & oil SCRs and identifying technology gaps and solutions. This is a technical position where you will need to have experience with riser components and vessel systems.
|
| |
 |
 |
|
Structural/Marine Engineer
| Location: |
Houston |
| Description: |
We are looking for Structural/Marine Engineers. Both senior level and one with less experience. Need experience working on cason, piles and mud mats. The position requires ANSYS experience; mooring experience is appreciated, but not required. For those with senior experience, the ability to manage, direct and train junior engineers. Those with less experience need to have worked with subsea structures for at least two years. The company you would be working for performs engineering services in conjunction with a number of sister companies, that cover all aspects of subsea work. All project management is performed out of Houston with some work done in Louisiana. All engineers have an office, with senior engineers getting a window office. This is a growing company that likes to promote from within and there is excellent opportunity for growth.
|
| |
 |
 |
|
Subsea Design Engineer
| Location: |
Houston |
| Description: |
We need a Subsea Design Engineer who can design high pressure gate valves, high pressure gate valves to API specs, blowout preventors, subsea/surface chokes and actuators. This person will review customer specifications, create assembly drawings and shop orders, give customer technical assistance. This company has its own state of the art manufacturing facility located near Houston
|
| |
 |
 |
|
Subsea Project Manager
| Location: |
Houston, Texas |
| Description: |
You will be responsible for all design, production, installation, and procurement for deepwater structures that include PLETs, PLEM, SEPLA anchors, shallow foundations, suction anchors, manifolds, and jumpers. You must have minimum of 9 years of experience in the deepwater oil and gas industry, as well as, a degree in mechanical, ocean, civil or aerospace engineering. You will need a strong background in structural, mechanical engineering, welding, pipeline installation, corrosion protection, and materials. Being registered as Texas professional engineer is a plus but not a requirement.
|
| |
 |
 |
|
Subsea Riser Engineer/ Project Manager
| Location: |
Houston |
| Description: |
A small, but fast growing subsea engineering firm, is growing their Houston office. They started as a riser specialty firm, and are now branched out into many different areas in subsea. This company is looking for sharp Subsea Engineers with riser design or analysis, or project experience with the design and installation of other Subsea equipment. Due to a flat management structure, they are very team oriented and are looking for those who work well in collaborative environments. This is a great opportunity for someone fed up with the bureaucracy of a larger company. Their parent company is well funded, giving you the benefit of a smaller company with the stability of a larger firm. Tremendous benefits include one of the best vacation policies we have seen in the industry.
|
| |
 |
 |
|
|
| Other Engineers | |
Area Operational Excellence Coordinator
| Location: |
Houston |
| Description: |
Skills needed: Wireline field operations experience, radiation and explosives experience. Excellent oral and written communication Candidate must be able to obtain ATF employee possessor status and NRC Trustworthy and Reliable status The scope of this position is to assist with development, implementation and monitoring/auditing of operational excellence policies and programs within assigned geographic area. Furthermore, the position will assist with ensuring regulatory and company policy compliance within assigned geographic areas in the fields of radiation and explosives. BS or equivalent experience with 5-7+ years
|
| |
 |
 |
|
Diagnostic Engineer
| Location: |
Houston |
| Description: |
This new team member will use the Company's proprietary suite of analytical tools to measure micro and macroscopic deformation, on the earth
|
| |
 |
 |
|
Fiber Optic Development Engineer
| Location: |
Spring |
| Description: |
This is a technical position for a Fiber Optic subject matter expert. You should be able to demonstrate innovation and industry influence with patents and publications. You will provide fiber optic expertise to management, R&D, engineering, business development and operations. This person is also responsible for managing development projects that include fiber optics, provide evaluations of third party fiber optic equipment, make recommendations to management, and mentor junior engineers. This company is one of our best clients and is the joint venture of a Super Major and major operator. They have multiple product lines that include downhole control systems, flow control, completion packers, injection systems, and downhole connectors. They have offices in multiple countries and have received multiple awards for their hydraulic systems.
|
| |
 |
 |
|
Flow Assurance Engineer
| Location: |
Houston, Texas |
| Description: |
The job demands an individual who can maintain the conceptual thermal hydraulic design of onshore and offshore pipelines and will evaluate the transient conditions and utilize the knowledge of the evaluation to develop an operating and control strategy for start-up and shut-down. One will analyze hydrodynamic instability and surge, and will manage all aspects of asphaltenes, chemicals, wax, scale, corrosion inhibition, hydrate inhibition, separation, and foaming. One will have direct client exposure, must be able to give advice on flow assurance matters and will work on in-house projects. One must have experience with the steady state thermal hydraulic design of pipelines, pipeline bundles, and flowlines; as well as experience with Olga, Pipesim, or Hysis and modeling of pipe in pipe insulated systems including gas injection and deepwater risers.
|
| |
 |
 |
|
GPS Engineer
| Location: |
San Francisco |
| Description: |
Prefer skills in GPS processing codes-Ex. Borland C++ to C# and experience in geotechnical and structural monitoring This person will (1)qualify the current system for areas where it is not currently used (longer baselines, new receivers, etc.) (2) Implement upgrades to the system and facilitate integration with other technologies like tiltmeters, InSAR and others and (3) Work on the core algorithms in the GPS processing to further improve the precision.
|
| |
 |
 |
|
Piping Engineer
| Location: |
Houston, Texas |
| Description: |
This position is located on the west side of town with a stable company. The position will include performing design calculations using CFD and pipe stress. You must also be familiar with Caesar and understand the industry standards such as, ASME B31.3, ASME B31.5, ABS, DNV, ASME B & PV Code, NACE, etc.
|
| |
 |
 |
|
|
| Petroleum/ Exploration/ Geophysical | |
Entry level Logging Engineer
| Location: |
Houston |
| Description: |
This person will operates and maintain a wireline unit. Acquires fracture mapping data and performs quality control. Coordinates work activities of two equipment operators. Mobilizes and deploys downhole tools. Coordinates project logistics with dispatcher, project manager, analysis personnel, contractors and company representatives. Promotes safety awareness and complies with all applicable safety procedures and regulations. Travels to and performs work at oil and gas wellsites, often in remote geographical areas. Generates job reports. Promotes teamwork. Performs other essential functions which may be assigned by management.
|
| |
 |
 |
|
Fracturing Consultant
| Location: |
Houston |
| Description: |
This Company is looking for talented Consulting Engineers who specialize in hydraulic fracturing to join their team. Primary focus of position is to acquire new jobs for the Company and also act in some cases in a project management capacity. This is a high level position and they look for the best in their industry for these roles. Experience must include the design of hydraulic fracturing treatments, on-site supervision and QC of stimulation treatments, and post-treatment analysis and optimization. Candidate's background should include fracture modeling, fracture fluid chemistry, and experience with stimulation equipment and services. Position requires a BS Degree in Engineering along with a working knowledge of log analysis and reservoir engineering, 5+ years experience in frac engineering. This person needs to know FracPro, Eclipse, Merlin.
|
| |
 |
 |
|
Microseismic Geophysicist
| Location: |
Houston |
| Description: |
The candidate will perform real-time microseismic analysis/interpretation of hydraulic fracture treatments to determine stimulation geometry and effectiveness. The candidate will work closely with Company and Client engineers to make better decisions in real-time. The candidate must be able to prepare client presentation materials and have excellent communication skills. 2 years seismic work experience is preferred. Previous microseismic experience or background in earthquake seismology is a plus. The person will have experience with borehole seismic, velocity modeling, and inversion techniques.
|
| |
 |
 |
|
Reservoir Engineer
| Location: |
Houston |
| Description: |
This person will support the Piceance Basin Asset Team by providing reservoir engineering analysis for project development, field performance, reservoir analysis, forecasting, and budgeting. BSPE degree with 1+ years experience.
|
| |
 |
 |
|
Reservoir Engineer
| Location: |
Houston |
| Description: |
The candidate will fulfill a reservoir engineering role on the Enhanced Oil Recovery (EOR) Team. The EOR Team is focusing on identifying and implementing an EOR process in one or more MOC-operated oil fields of the Big Horn Basin and Wind River Basin in northwest Wyoming. Based on the successful gas gravity-assisted double displacement project at The Circle Ridge Field, the reservoir engineer will be crucial in identifying other candidate fields for EOR, particularly concentrating on the double displacement process. Other EOR process, particularly steam flooding in our heavy oil fields and possibly alkaline surfactant flooding that takes advantage of our current waterflood operations, are being investigated. Skills needed: Reservoir transition planning, production & economic forecasting, analysis. Experience with Software-Eclipse (simulation)/Sapir(pressure analysis) BSPE with 5-15 years experience
|
| |
 |
 |
|
Sr. Logging Engineer
| Location: |
Houston |
| Description: |
This person will operates and maintain a wireline unit. Acquires fracture mapping data and performs quality control. Coordinates work activities of two equipment operators. Mobilizes and deploys downhole tools. Coordinates project logistics with dispatcher, project manager, analysis personnel, contractors and company representatives. Promotes safety awareness and complies with all applicable safety procedures and regulations. Travels to and performs work at oil and gas wellsites, often in remote geographical areas. Generates job reports. Promotes teamwork. Performs other essential functions which may be assigned by management. Will also be coordinating and executing the acquisition of fracture mapping data at the wellsite. 3+ years experience
|
| |
 |
 |
|
|
| Pipeline/ Midstream (Onshore &Offshore) | |
Cross Country Pipeline Engineer
| Location: |
Houston |
| Description: |
We need a Pipeline Engineer with significant experience in the issues affecting design of cross-country oil and gas pipelines. Our client is looking for someone who knows route selection and its associated constraints, crossing for river and water bodies, roads and railroads, environmental, archeological, land use and rights-of-way issues. You will be working on pipeline materials specifications, flow and pressure calculations, pipe stress implications and mitigation techniques. Your responsibilities include assurance of industry and regulatory standards and codes, pressure/leak testing and commissioning requirements and knowledge of current construction practices. BS Engineering required. Our client is a major pipeline company with operations in Alabama, Florida, Louisiana, Mississippi, and Texas.
|
| |
 |
 |
|
Flow Assurance
| Location: |
Houston |
| Description: |
We have an opening with a client that has been a stable high-end sub sea engineering company for many years. They are committed to hiring top-notch people to solve very complex problems. Currently, they are looking to fill a Flow Assurance position. You will need to have at least five years of process simulation experience and preferably have addition experience in surge analysis, fluid sampling and characterization. The software you will be using includes PIPESIM and OLGA, but they are willing to train if you have other related software experience. There is some moderate travel. The great thing is that you will be part of a very strong team of engineers from all disciplines and will have the opportunity to learn a lot.
|
| |
 |
 |
|
Pipeline Engineer
| Location: |
Houston |
| Description: |
If you are a Pipeline Engineer and would like to work with one of the fastest growing firms in Houston specializing in On-shore Pipelines and Gas Distribution Systems, this could be a great opportunity for you. One of our clients is looking for Candidates whose skills include developing pipeline alignment sheets, checking mechanical/civil drawings, interfacing with contractors, and developing bid packages. The company will consider non-degreed field technicians too. There is some travel involved with domestic assignments that may last from one to three months. This company has a flat management structure and is ideal for those who like to work in small collaborative environments. With millions of dollars of projects booked they are looking to rapidly increase their engineering staff. The right person could be selected for project management quickly because the company likes to promote from within. They have three floors in a first class facility and have the business to expand even further. All of the Vice Presidents are engineers and hands on with each of the projects, so you will be working with those who understand the challenges and rewards of project management.
|
| |
 |
 |
|
Pipeline Engineer
| Location: |
Houston |
| Description: |
We have an international client that is expanding its offshore oil & gas group in the Houston area. This company is looking to double its size in the next two years and has many options when it comes to benefit packages. They need a Pipeline Engineer who can perform Front End Engineering Design (FEED) studies for their subsea pipelines, flowlines and onshore underground pipeline systems. This position entails initial schematic preparation, modeling, cost estimating, consulting experience and implementation abilities. You will also be giving technical advice and making recommendations for hydro testing, downhole safety valves (DSVs) and steady state modeling. They are willing to consider someone with onshore or offshore experience.
|
| |
 |
 |
|
Pipeline Mapper
| Location: |
Houston |
| Description: |
Multiple positions in Houston Dallas and Monroe, LA. Experience with Alignment Sheets, Pipeline Mapping, GIS (ESRI), CAD, Bluesky software Right of way issues, and pipline road crossing.
|
| |
 |
 |
|
Subsea Electrical & Pipeline Commissioning Engineers
| Location: |
Houston |
| Description: |
We have a client with significant subsea project backlog who is expanding due to excellent growth in the Houston market. They are looking for at least four Subsea Electrical Engineers with great analytical and/or project-related skills. All levels of experience are encouraged to apply; three to five years and engineers with more than 10 years of experience will be considered. They have a strong, very diverse team of top-notch professionals that have created a great learning and working environment. They also have a more senior level position for someone with years of supervisory experience. This position is a Pipeline Commission Engineer who will be responsible for overseeing S and J lay pipelines. You will be working with installation engineers in the home office then oversee the installation on the pipelay ship or barge.
|
| |
 |
 |
|
|
| Project Management | |
Gas Storage Engineer Manager
| Location: |
Houston, Texas |
| Description: |
This is a high profile position that has minimal supervision and only requires regular reports to the V.P. of Operations. The job responsibilities deal with gas storage monitoring, evaluation, optimization and gas storage inventory management. One will be responsible for the analysis and performance optimization of both salt caverns and reservoirs. Also, one will have the task of managing engineering contractors/vendors, as well as, play a support role in the company’s efforts for acquisitions of operating assets. In order to qualify for the job one must have a Bachelor of Science degree in engineering, must have seven to ten years experience with gas reserves and three or more years experience in management.
|
| |
 |
 |
|
Installation/Project Engineer
| Location: |
Houston |
| Description: |
This position requires marine operations experience. It could be a great fit for those who have worked on FPSOs, or fixed platforms. It needs to be someone who knows how to deal with all ship systems, areas and people, such as the ROV operators, roughnecks, etc. There is regular travel offshore and to Louisiana. Other duties include costing, supervision, and development of installation procedures of mooring systems. If you have experience as a field engineer, or offshore construction, your skills could be well suited for the needs of our client. The client is willing to look at someone who does not have significant installation experience, but you must have offshore experience. This is a perfect opportunity to put someone on the path to project management as the business grows.
|
| |
 |
 |
|
Lead Integrity Management Engineer
| Location: |
Houston |
| Description: |
One of our fastest growing clients is a small, international firm with big plans and big projects. They produce engineering solutions for the subsea industry and are currently looking for Lead Integrity Management Engineers for their Houston office. This is a senior position for someone with a Masters or PhD. You will be responsible for aligning company services with industry standards and training the engineering team. The ideal candidate has at least five years of subsea experience in integrity management, equipment failure, strategies for inspection, system improvement and monitoring.
|
| |
 |
 |
|
Project Managers
| Location: |
Houston |
| Description: |
One of our clients is looking for very strong project engineers/managers. They need someone who can work with clients, run the project and is still hands on with the engineering. The key traits are that they need to have Natural Gas Transmission & Distribution. They also need to be able to interface with construction contractors, perform pipeline engineering, and check drawings put out by the engineering department. They will also need to be able to develop construction bid packages and conduct job showings. They are looking for someone who can work independently, and also mentor Project Engineers. There will be occasional travel to the client site to meet with customers.
|
| |
 |
 |
|
Project Engineer
| Location: |
Houston |
| Description: |
We need talented Consulting Engineers who specialize in hydraulic fracturing to join a great team. Experience must include the design of hydraulic fracturing treatments, on-site supervision and QC of stimulation treatments, and post-treatment analysis and optimization. Ideally your background would include fracture modeling, fracture fluid chemistry, and experience with stimulation equipment and services. Position requires a BS degree in Engineering along with a working knowledge of log analysis and reservoir engineering, 5+ years experience in frac engineering. You also need to know either FracPro, and/or Eclipse and/or Merlin software systems.
|
| |
 |
 |
|
Project Manager
| Location: |
Houston |
| Description: |
BSME or PE required with 2-5+ yrs experience Must have experience in hydraulic fracturing, Hysim and T-Sweet Duties include:
|
| |
 |
 |
|
Project Manager (NE US)
| Location: |
Houston |
| Description: |
Fracturing site management and project management. Must have project management experience or have been in a district/region engineering role as well as experience in hydraulic fracturing, Hysim and T-Sweet
|
| |
 |
 |
|
Project Manager- Downstream
| Location: |
Houston |
| Description: |
This Company is looking to expand their project management capability. Project management experience is the key. They prefer to have someone mid level 10-15 years total experience, with 1-5 years as a Project manager. They will consider a strong engineer who has acted as a junior or assistant project manager on a downstream project. Perfect candidate will come from a Power Plant, but they will look at any Refinery, Petrochem, and Pulp and Paper experience. This candidate can come from a Mechanical, Process, or Chemical background. If someone wants the top end of the salary they better have 25 plus years experience and worked on big projects.
|
| |
 |
 |
|
Subsea Project Manager
| Location: |
Houston, Texas |
| Description: |
You will be responsible for all design, production, installation, and procurement for deepwater structures that include PLETs, PLEM, SEPLA anchors, shallow foundations, suction anchors, manifolds, and jumpers. You must have minimum of 9 years of experience in the deepwater oil and gas industry, as well as, a degree in mechanical, ocean, civil or aerospace engineering. You will need a strong background in structural, mechanical engineering, welding, pipeline installation, corrosion protection, and materials. Being registered as Texas professional engineer is a plus but not a requirement.
|
| |
 |
 |
|
Upstream Project Manager
| Location: |
Houston |
| Description: |
This person will report to the Project Director. Will handle overall Engineering Management responsibility for large offshore topsides production facility projects. Responsibilities include; HSE, Commercial, Design, Quality and Risk Management. Fifteen (15) + years experience in offshore industry with specific project experience as Project Manager / Engineering Manager for a deepwater Gulf of Mexico Floating Drilling and Production Facility.Deepwater Gulf of Mexico Project experience preferred.
|
| |
 |
 |
|
|
| Purchasing/ Contracts/ Logistics/ Expediting |
|
| Sales/ Marketing/ Sales Management | |
Business Development-Expandables
| Location: |
Houston |
| Description: |
This is a Business Development position for the Expandables Group. Our client is looking for someone who has business development experience in the oilfield or Manufacturing or Pipelines. Ideal candidates will have at least 6 years of experience in the Sales Operations.
|
| |
 |
 |
|
Business Partner Specialist
| Location: |
Houston |
| Description: |
This position requires someone who is skilled in developing and maintaining business development initiatives. You will be asked to work on marketing projects, public relations, conduct research and give presentations. As a Business Development contact for the client, you will be assigned duties including strategic plan development, working with other business development contacts and staff to leverage relationships and participate in promotional projects. This could be a great position for you if you are interested in Community Development. Our client is looking to increase membership and identify partnership, educational and media opportunities through the local community.
|
| |
 |
 |
|
Deepwater Drilling Sales
| Location: |
Houston |
| Description: |
Develop and maintain a sales forecast. Develop sales strategies specific to the area. Provide accurate market analysis and intelligence. Prepare sales presentations. Provide suggestions for earnings growth. Work with customers on clear and complete quotation requests. Provide a single point contact for assigned accounts. Negotiate acceptable terms and conditions of sale Responsible for developing and maintaining sales with deepwater drilling contractors in Houston. Product line responsibility includes blowout preventers, riser, controls, manifolds and other drilling product lines. BS preferred and 5-10 years industry experience in deepwater drilling applications as a minimum.
|
| |
 |
 |
|
Sales Engineer
| Location: |
Houston |
| Description: |
We need someone with technical expertise in process solutions and sales experience for an opportunity with one of the world
|
| |
 |
 |
|
|
| Scheduling/ Cost Control/ Project Control/ Estimating | |
Estimator
| Location: |
Houston, TX |
| Description: |
This company is looking for Estimators for a large E&C for contract/hire in Houston TX. Experience with tank estimating is a major plus. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates. Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Approved by JH 07/24/09
|
| |
 |
 |
|
Lead Estimator
| Location: |
Houston |
| Description: |
This position will lead and supervise a medium to large team of engineers. We are looking for someone who has extensive estimating experience both at site and within a Head Office environment. You should possess an excellent understanding of estimating software together with the experience to adopt best methods of work. Applicants should possess highly developed time management skills and be able to prioritize requirements to meet target times and budgets. You will be required to give presentations and to maintain effective relations within project teams and clients.
|
| |
 |
 |
|
Manufacturing Cost Estimator
| Location: |
Houston |
| Description: |
One of our clients is on the cutting edge of valve technology and is ready to hire a Manufacturing Cost Estimator. You should have experience in cost analysis for manufacturing projects and be able to negotiate prices with subcontractors. BS degree is preferred, or two years of direct industry experience can be substituted in lieu of college degree. This company has excellent benefits and its environment is business casual.
|
| |
 |
 |
|
Manufacturing Cost Estimator
| Location: |
Houston |
| Description: |
BS with two yrs related experience. Will prepare cost estimates for projects, manufacturing of engineering products, requested to aid in bidding on or determining price of product or service. This person will be reviewing data to determine material and labor requirements and prepares itemized lists, analyze blueprints, specifications, proposals, to prepare time, cost, and labor estimates for products, projects, or services. Also compute cost factors and prepares estimates, scheduling work, preparing bids, selecting vendors or subcontractors, and determining cost effectiveness. Consults with clients and vendors to formulate estimates and resolve issues. Will be using blueprints and specifications. Itemizes tools, fixtures, or equipment to be manufactured by company or purchased from outside sources. Computes cost estimates for materials, purchased equipment, subcontracted work, production activities and requirements, and labor.
|
| |
 |
 |
|
Planner/ Scheduler/ Cost Controls
| Location: |
Houston |
| Description: |
A very large Engineering and Construction firm with business throughout the U.S. is looking for Senior Planner/Schedulers with Primavera P3 experience on large EPC projects. They are also looking for those with strong Cost Control experience. There are multiple positions in one of their regional Gulf Coast offices, or out on the field on the project site. Both contract and full-time opportunities are available depending on the Candidate's preference. This is a large, publicly traded company with many large projects throughout the county; there is a lot of opportunity for the right person. Although the firm is based in Houston, one must be willing to travel domestically as projects change.
|
| |
 |
 |
|
Primavera Planner/ Scheduler
| Location: |
Houston |
| Description: |
Skills Preferred: P3 Primavera Experience on large EPC Projects and estmating P6 Primavera Experiences with Pipelines or Compressor stations Work with a very fast growing group, and a new scheduling team that will give the right person a lot of opportunity to show what they can do.
|
| |
 |
 |
|
Project Controller
| Location: |
Houston |
| Description: |
This person will work on budgeting, controling costs, planning, scheduling and procedural changes. BS in accounting, finance or business admin
|
| |
 |
 |
|
Project Controls Manager
| Location: |
Houston, TX |
| Description: |
This company has an immediate need for Project Controls Managers and Specialists. They need all levels of experience starting at 7 years of experience on large E&C projects in the Oil & Gas industry. Preference will be given to those with over 15 years experience. They will consider either direct hire or contract candidates. This is a Houston based position and there will be no per diem. Disclaimer: Regrettably at this time our clients will not be able to sponsor any candidates.Note: This time our client will only consider candidates in the U.S. only. In addition, relocation assistance is not being offered with this position. Written by JH, approved by JH 07/08/09
|
| |
 |
 |
|
Project Controls Specialist
| Location: |
Houston |
| Description: |
The incumbent will work as a Project Estimator in support of upstream and downstream's Major Projects. Responsibilities will include coordination of conceptual and feasibility cost estimating activities for capital projects, working in conjunction with Major Projects and Project Owner organizations. Additional responsibilities include: assisting project personnel in performing conceptual, definition and detailed cost estimates; coordinating the development of estimating processes, deliverables and tools across the organization. Experience utilizing either Icarus or Questor estimating programs will be considered a plus. The successefull candidate will also assist with setting up WBS accounts as estimates transition to Project Controls / Cost engineering.
|
| |
 |
 |
|
Proposals Specialist
| Location: |
Houston |
| Description: |
This person will prepare quotations/proposals for capital drilling equipment and associated spare parts. Drilling products and commercial knowledge are required in order to evaluate RFQs both technically and commercially to insure that the quotation/proposal meets the requirements of both the Customer and Company. BS or BBA preferred with 10+ years experience.
|
| |
 |
 |
|
Sr. Estimator/Project Controls
| Location: |
Houston |
| Description: |
We have a full-time, direct hire position for an Estimator. You would be estimating costs of performing and material costs for FEED studies for offshore pipelines and field development projects. Duties include writing estimate plans, reviewing scope of work, and developing estimating data. The clients would prefer someone who has worked with offshore/subsea pipline or subsea field developments and who has a BS in Accounting or Engineering.
|
| |
 |
 |
|
Sr. Production Controls
| Location: |
Houston |
| Description: |
We need someone with Production Controls experience for a senior level position. Our client is looking for someone who can plan and execute shop floor inventory replenishment based on weekly production plans and participate in production, material shortage and engineering-change-order (ECO) activity. You will also need to be able to monitor and report shipments, review project scope of supply and have some exposure to Primavera/P3 or MS Project. The company builds high-performance mud pumps for oil and gas drilling (onshore and offshore), petroleum production. Very casual office environment.
|
| |
 |
 |
|
|
|
|
|